Pay in installments of $5.83 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jun 29 - Jul 4
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
cybex aton safety Aton G2 Swivel Infant Car Seat with Load Leg Base by Cybex Stone GreyThe CYBEX Aton G2 Swivel redefines convenience with its 180 rotating base, making it effortless to load and unload your child. Advanced safety features, including an Anti Rebound base with Load Leg and Linear Side Impact Protection, work in harmony to significantly reduce collision forces on your child. Designed to be lightweight and ergonomic, it also boasts an adjustable headrest, no rethread harness, air ventilation, and a SafeLock belt tensioner
The CYBEX Aton G2 Swivel redefines convenience with its 180° rotating base, making it effortless to load and unload your child. Advanced safety features, including an Anti-Rebound base with Load Leg and Linear Side-Impact Protection, work in harmony to significantly reduce collision forces on your child. Designed to be lightweight and ergonomic, it also boasts an adjustable headrest, no-rethread harness, air ventilation, and a SafeLock belt tensioner for a quick and secure installation. Experience unparalleled safety and ease with the Aton G2 Swivel.
- 180° SWIVEL: The 180° rotating base provides an ergonomic swivel that makes it easier than ever to load and unload the child from the carrier while the seat is installed in the vehicle.
- LIGHTWEIGHT DESIGN, ADVANCED SAFETY: With its lightweight design, the Aton G2 Swivel is one of the easiest carriers to install and carry, without compromising on safety.
- SENSORSAFE TECHNOLOGY: SensorSafe™ keeps you informed through instant smartphone notifications—so you’ll know if your child’s chest clip opens, the car becomes too warm or cool, or they’re left alone.
- LINEAR SIDE-IMPACT PROTECTION (L.S.P.): Integrated directly into the seat's shell, the L.S.P. System helps absorb and channel crash forces away from your child, reducing impact energy in a side collision.
- ANTI-REBOUND BASE WITH LOAD LEG: The Aton G2 Swivel base combines an Anti-Rebound Bar with a Load Leg to absorb energy and reduce crash forces on the child by up to 30%*
- QUICK AND SIMPLE SEAT BELT INSTALLATION: Optimized for seat belt installations, the SafeLock Belt Tensioner offers a quick, simple, and secure installation. GREENGUARD Gold
- CERTIFIED: Ensures lower chemical emissions; contributes to healthier air quality around your child
- ENGINERRED FOR PROTECTION: Our child restraint systems are fully compliant with FMVSS 213B side and frontal-impact safety standards—giving parents peace of mind in the event of a collision. 11-
- POSITION ADJUSTBLE HEADREST: The 11-position height-adjustable headrest features an integrated harness guide that automatically adjusts the harness length as the headrest is raised, eliminating the need for rethreading. EASY-GLIDE
- RECLINE: In-base recline allows you to adjust the recline angle for a proper fit without having to re-install the base. AIR
- VENTILATION: Keep your child comfortable in all seasons thanks to all-around air ventilation with the perforated shell and mesh fabrics.
- OVERSIZED SUN PROTECTION: Providing maximum sun protection, the UPF50+ oversized canopy elegantly tucks away when not in use.
- FIRE-RETARDANT CHEMICAL-FREE FABRIC: The FR-free materials used in CYBEX car seats pass all regulatory requirements while containing no additional added FR-chemicals.
- TRAVEL SYSTEM COMPATIBLE: Easily attaches to your CYBEX stroller creating a convenient and versatile travel system designed for life's adventures on the go. EASY-IN BUCKLE PAD: Keeps the buckle forward and out of the way, making it easier to secure your child
- EUROPEAN BELT PATH: Provides a safe, tight install using just a seatbelt, so you’re ready for taxis, travel, and quick trips.
- FAA-COMPLIANT: Approved for use on aircraft without the base, offering a safe, convenient solution for flying families.
- EASY TO CLEAN: The seat fabrics are crafted for easy care, enabling hassle-free machine washing to keep the car seat fresh and clean with minimal effort. *As compared to the same car seat without this feature.
What's in the box
- Aton G2 Infant Car Seat
- Aton G Swivel Load Leg Base
- SensorSafe Chest Clip
- Infant Insert
- User Manual
Specifications
- Dimensions: 26.1"L X 17.5"W X 14.7"H
- Carrier weight: 9 lbs.
- Compatible with all Cybex strollers
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.3 ★★★★★
Based on 1445 reviews
Sort
Product Reviews
★★★★★ 5
Works
Size: 3 Panel-102'', Color: Beige, Size: 3 Panel-102'', Color: Beige
It’s beige and not white. Once install - hard to disinstall. Need a drill to put it together
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026
★★★★★ 3
Does the job, but assembling by yourself is a nightmare
Size: 4 Panel-88'', Color: Black
Does it do the job? Yes, although as others said there are small gaps but it's not a huge deal. The price is also good. But the reason I'm giving it a 3/5 is simply because the assembly for this was a complete nightmare. I honestly don't think I would recommend this to anyone unless they have another person to help them assemble it, because doing it by myself was terrible. I don't think I'd buy this again, I think I'd opt to just spend a bit more money and save myself the trouble personally.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it.
Couple things:
1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky.
One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection.
Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it.
2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless.
3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together.
4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place.
5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options.
NOW on to the utility itself.
1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great!
2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world.
3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it.
All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
★★★★★ 5
Easy peasy
Size: 1 Panel, Color: Black
Bought this single-panel room divider for my son so he has a little privacy when he has to keep his camera on for online classes.
It’s lightweight, easy to set up, and does the job—he can focus without me photobombing in the background. He can feel like he has his own tiny corner office, even if it’s just the basement.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 29, 2026
★★★★★ 5
It serves it's purpose!!
Size: 1 Panel, Color: Black
Product really works well & serves it's purpose! Great height & width. It's flimsy, but it will stand still when put in place.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 4, 2025
recommand products
Philodendron Mini Monstera Minima - Live Tropical Houseplants For Sale
27.87
The Snobby Leaf | Philodendron Monstera Split-Leaf - 4 inch Pot
20.87
Philodendron Pertusum Monstera Deliciosa – The Boho Being, LLC
26.82
Live Philodendron Micans Plant in Biodegradable Pot Thorsen's Greenhouse Terra Cotta 6.0" H x 4.0" D
25.85
Philodendron Monstera Deliciosa – ShopTropicals
27.26